Rule library
UAD1187FatalField 10.004Subject

Provide the 'Finished Above Grade (Nonstandard)' Area, even if the value is 0.

Where this rule lives in the report

Unit Interior
Finished Above Grade (Nonstandard)

Report Section as the GSEs define them — the black tab and grey bar you already read on the URAR.

Severity
Fatal — this blocks your UCDP submission and must be fixed before delivery.
Triggered when
(ImprovementType = "Dwelling" or (ImprovementType = "Outbuilding" and OutbuildingRealPropertyIndicator = "true" and AccessoryDwellingUnitIndicator = "true")), and UnitNonStandardAboveGradeFinishedAreaMeasure is not provided in a given instance of PROPERTY_UNIT_AREA
Data Point Name
UnitNonStandardAboveGradeFinishedAreaMeasure
Unique ID
0700.0141
Report Field ID
10.004
What this field means
A measurement that specifies the total finished area, above grade, that cannot be considered as living area per the applicable standard and/or policy. The applicable unit of measurement is specified by the Area Unit Of Measure Type.

Seen in the sample reports

How this field is populated in the official UAD 3.6 sample scenarios.

More rules in “Unit Interior”

UAD1138Provide the type of accessibility feature. Select 'None' if there are no accessibility features.
Fatal
UAD1139Provide the primary exterior access method (e.g., walk-out, walk-up) for the below grade area.
Fatal
UAD1140Provide a description when 'Grade Level' = 'Other'.
Fatal
UAD1141Provide the Grade Level Type (i.e., Above Grade, Fully Below Grade, Partially Below Grade) for the level.
Fatal
UAD1142Provide the level type (e.g., Level 1, Level 2, Level B1).
Fatal