Rule library
UAD1775FatalField 22.05.37Sales Comparable #n

Provide the 'Manufactured Home Width' (i.e., Single Wide, Multi Wide) for the sales comparable.

Where this rule lives in the report

Sales Comparison Approach
Manufactured Home Width
Dwelling(s)

Report Section and Report Subsection as the GSEs define them — the black tab and grey bar you already read on the URAR.

Severity
Fatal — this blocks your UCDP submission and must be fixed before delivery.
Triggered when
@ValuationUseType = "SalesComparable" and ImprovementType = "Dwelling" and ConstructionMethodType = "Manufactured" and ManufacturedHomeWidthType is not provided
Data Point Name
ManufacturedHomeWidthType
Unique ID
1800.0379
Report Field ID
22.05.37
What this field means
Specifies the common size (width) designation of a Manufactured home.

Seen in the sample reports

How this field is populated in the official UAD 3.6 sample scenarios.

MultiWideSubject
Manufactured home (MH1)
MultiWideSubject
Manufactured home (MH2)

More rules in “Sales Comparison Approach”

UAD1093The structure identifier must be unique.
Fatal
UAD1097Indicate whether the dwelling has any non-continuous finished area (e.g., a finished office above, below, or behind an attached garage that cannot be accessed from within any living unit).
Fatal
UAD1172The unit identifier must be unique.
Fatal
UAD1253Provide the value of the subject property as determined by the Sales Comparison Approach method of property valuation.
Fatal
UAD1390Provide the address line for the sales comparable.
Fatal